Angkorscape provides landscape design in Lake Tapps, WA, turning lakefront lots and fenced backyards into outdoor living spaces you can see in 3D first. One team handles the design, the Pierce County or Bonney Lake permits and the construction, working from our Bellevue studio.
A Reservoir With Two Rulebooks
Lake Tapps is a managed reservoir, and that changes what a design can do near the water. Cascade Water Alliance owns the lake bed and the shoreline up to the 545-foot elevation line. Pierce County or the City of Bonney Lake sets the shoreline rules, depending on where the lot sits.
Bonney Lake covers about 9.5 of the lake's 45 shoreline miles, and Pierce County covers the other 35.5 (Bonney Lake shoreline plan). The same plan places Lake Tapps on an upland glacial drift plain. Many yards sit on glacial soils that can drain slowly below the topsoil.
One Plan Covering the Whole Lot
Angkorscape’s outdoor living design for Lake Tapps covers design-build, landscaping and hardscaping with one team.
Why One Team Fits This Lake
When your landscape designer is also your landscape contractor, a Lake Tapps yard can be planned, priced and permitted as one job. One lakefront yard can involve the county or city and the lake's owner.
A lot inside Bonney Lake follows the city's shoreline code, while most of the lake follows Pierce County's. Setbacks, coverage limits and permit steps differ, so the first question is which one covers your parcel.
Cascade keeps the lake between 541.5 and 543 feet from April 15 to September 30, then lowers it each fall. Waterfront landscaping on Lake Tapps should look right at both levels, from summer swimming season to the lower winter waterline.
Grading, drainage and planting are planned together, so runoff soaks in or is directed before it reaches the water.
Our Ever After project in Lake Tapps and Twin Track project in Edgewood are both Pierce County outdoor living projects. Ever After replaced a plain concrete patio and lawn, and Twin Track leveled a sloped, soggy lawn.



Lake Tapps and Nearby
Angkorscape serves Lake Tapps homeowners on and off the water, plus nearby Pierce County communities.
From First Call to Build Day
Angkorscape's Lake Tapps process runs in five steps, from a free Zoom consultation to the build. See the full design-build process and design-build pricing for details.

We start with a free Zoom consultation about your goals, your budget and whether your lot touches the lake.
Our designer measures the property in person and checks slope, drainage and where the yard meets the shoreline.
The first 3D concept can take up to four weeks and comes with a video walkthrough, screenshots and an initial estimate. On a lakefront lot, this is the stage to settle what sits inside the setback and what stays above Cascade's line.
We handle permits, engineering and HOA packages, a phase that typically runs around three months. Lakefront work may also need a license from Cascade before construction starts.
Shoreline work starts once any Cascade license and county or city permits are in hand. We contact 811 about one to two weeks before kickoff, and a dedicated foreman and project manager run the build.
What Clients Say
These Google reviews from Angkorscape clients across Greater Seattle appear on our testimonials page. Neither names a city, but both describe the design-build approach a Lake Tapps project follows.
Ever After, Lake Tapps
Ryan and Teresa wanted their Lake Tapps backyard transformed before their wedding, with a clean, modern space that would stay low maintenance for years. The yard had a basic concrete patio, natural lawn and one main gathering area.
We replaced the concrete with Belgard pavers, set porcelain stepping stones over decorative gravel and installed artificial turf. A covered patio, a fire pit patio, privacy screens and landscape lighting now create separate areas to dine, relax and entertain. The Ever After project is listed at $70K to $85K.


Shoreline landscape design on Lake Tapps depends on who regulates your parcel, and Cascade's ownership line applies on top of either one.
Sources: Pierce County Code 18S.30 and Bonney Lake Municipal Code 16.40.030. In the county, fences up to 4 feet can sit in the Lake Tapps setback if they stay above the 543-foot line and remove no trees. Both codes allow limited setback reductions through their own review, so treat these numbers as a starting point for your parcel.
Building below the 545-foot line takes a Cascade license, because that strip of shoreline belongs to the lake's owner rather than the homeowner. Cascade requires a license for all new or modified improvements, uses and activities on the reservoir. For lakefront work, the approvals usually stack up like this:
Many lakefront landscaping ideas, like patios, fire pits and planting beds, can sit above Cascade's line. There, county or city rules apply instead of a Cascade license.
Many Lake Tapps backyard projects need at least one Pierce County permit, depending on their size, height and location. Homes inside Bonney Lake follow the city's permits instead. In unincorporated Pierce County, these are the common triggers:
Our landscaping permit guide covers the wider process.
Whether your lot meets the water or sits a few streets back, the plan starts with what your parcel allows. Then it's shaped around how you'll use the yard.

Questions Before a Lake Tapps Project
Often, yes, for hardscape, structures or grading near the water. Lots in unincorporated Pierce County follow the county shoreline code, and lots inside Bonney Lake follow the city's. New improvements on Cascade's land also need a Cascade license.
In unincorporated Pierce County, the Lake Tapps setback is 50 feet, measured from the 543-foot full-pool elevation, the top of the lake's summer range. Inside Bonney Lake, setbacks run 60 to 80 feet from the ordinary high water mark (the usual high-water line), depending on what you build. In the county, limited access paths and landscaping can go closer with an approved planting plan.
Angkorscape's 3D Conceptual Design starts at $2,500, and build costs depend on scope. Our Ever After project in Lake Tapps is listed at $70K to $85K, with permits and surveys billed separately. Our landscape design cost guide breaks down the rest.
No. Under Cascade Water Alliance’s reservoir rules, drawing water from Lake Tapps to irrigate a landscape is illegal, so irrigation needs to run on your home's own water supply.
Cascade begins the fall drawdown on November 1 and lowers the lake to about 538 to 539 feet. It refills in spring and keeps the lake between 541.5 and 543 feet from April 15 to September 30.
Skip the back-and-forth between a separate designer and contractor. One Angkorscape team designs, permits and builds your Lake Tapps yard, from the first 3D concept to the final walkthrough.
A space worth building is a space worth planning. Every project starts with a design — fees begin at $2,500.
Tell us about your project and we'll follow up within one business day.